| Working conditions | Lithium titanate special equalization plate parameters |
| Balanced starting voltage | 2.0V-2.8V |
| Balance termination voltage | 1.9V ( into undervoltage sleep state ) |
| Balance accuracy | 5mv |
| Sleeping current | ≤1mA |
| Maximum balance current | The whole group error is 0.1V 1A / 0.5V 3.5A/ 1.0V 5.5A ( 18awg 30cm cable test) |
| 5S-LTO quiescent current | Full power state ( 2.8v*5cell) 14V 12mA |
| 6S-LTO quiescent current | Full power state ( 2 8v*6cell ) 16.8V 15mA |
| 7S-LTO quiescent current | Full power state ( 2 8v*7cell ) 19.6V 12mA |
| 8S-LTO quiescent current | Full power state ( 2 8v*8cell ) 22.4V 12mA |
| Whether external power supply is required | No external power supply is required. and the whole group is balanced by the internal energy transfer of the battery. |
| Working environment temperature | 0-60°C |
| Working conditions | Ternary lithium/ LEP lithium iron phosphate parameters |
| Balanced starting voltage | 3.0V-4.2V |
| Balance termination voltage | 2.9V ( into undervoltage sleep state ) |
| Balance accuracy | ≤5mv |
| Sleeping current | ≤1mA |
| Maximum balance current | The whole group error is 0.1V 1A / 0.5V 3.5A/ 1.0V 5.5A ( 18awg 30cm cable test) |
| 3S quiescent current | Full power state ( 4.2v*3cell) 12.6V 12mA |
| 4S quiescent current | Full power state ( 4.2v*4cell ) 16.5V 15mA |
| 7S quiescent current | Full power state ( 4.2v*7cell ) 29.4V 15mA |
| 8S quiescent current | Full power state ( 4.2v*8cell ) 33.6V 11mA |
| 15S/16S/17S on same board quiescent current | Full power state ( 4.2v*17cell ) 71.4V 10mA |
| Whether external power supply is required | No external power supply is required. and the whole group is balanced by the internal energy transfer of the battery. |
| Working environment temperature | 0-60°C |
Technical parameters
Operating voltage 1.8V-4.5V, suitable for li-ion, LiFePo4, lithium titanate.
Working principle: the balanced work will be started when the balanced board is connected to the battery. The original ultra-low internal resistance MOS and 2OZ copper thick PCB are adopted, And the balanced current is 0-5.5a, the more balanced battery, the smaller balanced current.
The static current is around 12 mA. It is recommended that the battery capacity should be in the range of 60-300AH!
With undervoltage dormancy protection, if the voltage is less than 1.8V, it will automatically stop into the dormancy state, standby power consumption is less than 0.1 mA.
Li-ion/Lifepo4 /Lipo version
Balance start voltage: 3.0V-4.2V
Balance termination voltage: 2.9V (into undervoltage sleep state)
Maximum Balance current: The whole group error is 0.1V1A; 0.5V3.5A; 1.0V5.5A (18awg 30CM cable test)
3S quiescent current Full state: (4.2v*3cell) 12.6V 12mA
4S quiescent current Full state: (4.2v*4cell) 16.5V 15mA
7S quiescent current Full power state: (4.2v*7cell) 29.4V 15mA
8S quiescent current Full power state: (4.2v*7cell) 33.6V 14mA
Whether external power supply is required: no external power supply is required, and the internal energy transfer of the battery is used to transfer and the entire set batteries pack in balance .
Working environment temperature: 0-60 degrees
LTO version
Balance start voltage: 2.0V-2.8V
Balance termination voltage: 1.9V (into undervoltage sleep state)
Maximum Balance current: The whole group error is 0.1V1A; 0.5V3.5A; 1.0V5.5A (18awg 30CM cable test)
5S LTO quiescent current Full state: 2.8v*5cell) 14V 12mA
6S LTO quiescent current Full state: 2.8v*6cell) 16.8V 15mA
Whether external power supply is required: no external power supply is required, and the internal energy transfer of the battery is used to transfer and the entire set batteries pack in balance .
Working environment temperature: 0-60 degrees
It's for LFP,LTO,NMC batteries.
