Built In BMS With Indicator 12V 50ah Battery Pack For Scooters
Parameters:
| | | |
| | Nominal Voltage: | 12V | Any voltage can be customized |
| Nominal Capacity: | 50Ah | Any capacity can be customized |
| Discharge Cut-Off: | 10V | |
| Charge Cut-Off: | 14.6V | |
| Charge Current: | 50A | Free customization service |
| Cont. Discharge: | 100A | Free customization service |
| Peak Discharge: | 200A | Free customization service |
| Impedance: | ≤20mΩ | |
| Charge Temperature: | 0℃ - 45℃ | |
| Discharge Temperature: | -20℃ - 60℃ | |
| Charge Method: | CC/CV | |
| Life Cycle: | 2000+ | 80% DOD, Max. 95% DOD |
| BMS: | With BMS | |
| Dimension: | L*W*H: 261*77*175mm | Any dimension can be customized |
| Weight: | 9KG | |
| | Prismatic LiFePO4 Cell | 3.2V 50Ah/25Ah | 4S1P/ 4S2P |
| | | Single cell overcharge protection voltage | 3.9±0.05V |
| Single overcharge release voltage | 3.6±0.05V |
| Charge Protection | Rated charging current | ≤100A |
Over discharge protection | Single cell over-discharge protection voltage | 2.20±0.1V |
| Single-substrate release voltage | 2.7±0.1V |
| Rated discharge current | ≤100A |
| Discharge protection current | 500±100A (10mS) |
| Short circuit protection | Short circuit protection | 200-600 µs |
| Communication Function | Support | Confirm with supplier |
| Balance | Active cell balancing | Confirm with supplier |
| | Display content | Voltage/ Capacity%/ Working Temperature | |
| | ABS plastic case | With handle | |
| IP Grade | IP65 | |
Any volt and capacity support OEM, such as 12V 100AH, 12V 200AH, 24V 100AH......
Also, with Bluetooth/CAN Comunication is ok if u need.
Curve:
Futures & Benefits:
1. High Cycle Life:>2500 times @ 80%DOD for effectively lower cost of ownership
2. Built-in BMS Protection:Battery Management System are incorporated to protect battery from
3. OVER CHARGING,OVER DISCHARGING, SHORT CIRCUIT
4. LIGHT WEIGHT: Dry power lithium batteries has higher energy density,wh/kg also being up to 1/3 of SLA battery
5. WIDE OPERATING TEMPERATURE RANGE:Suitable for users in a wider range of application where ambient
temperature is unusually high: up to +60°C
6. STEADY OUTPUT VOLTAGE,VIBRATION &SHOCK RESISTANT,NO MEMORY EFFECT,PRESSURE RESISTANT CELLS
Suitable Applications:
1. Lithium Iron Phosphate can be used in any application that would normally use Lead Acid, GEL, or AGM type batteries.
2. LiFePO4 in 4S=12.8V and 8S=25.6V is closed to Lead Acid equivalents of the Lithium rechargeable types
3. Suitable applications included caravan, marine, golf carts, solar storage,remote monitoring, switching applications
CAUTIONS
1. Do NOT expose the battery to water
2. Do NOT expose the battery to fire & high temperature
3. Do NOT short circuit, crush or disassemble
4. Only use LiFePO4 charger
5. Store at 50% capacity, recharge every 3 months. The storage area should be clean, cool, dry and ventilated.
NOTE: we offer one top-service items to you
If you want single cell, BMS, active baalncer and charger, we all can help you.
ANY QUESTIONS OF PROBLMES WELCOME CONTACT US FREELY, SNED US E-MAIL/ CALL US ALL IS OK
Product Tags:
|
|
Built In BMS 50ah Rechargeable 12v Power Bank For Scooters Images
|
